Laboratories and factories have to install an emergency response plan. Safety showers are one part of this selection. The other part is eyewash equipment, which flushes out the eyes of an exposed person. It also has two names: an emergency (drench) shower. Safety shower is a kind of apparatus for washing if an industrial worker has any exposed substance. Its main function is effective in washing away any caustic substance from the human body so as to reduce the hidden danger and cause to the human body.
In this essay, let’s have a great look at safety showers.
What are safety showers?
A safety shower on a factory floor.
A safety shower is a type of first aid facility installed in manufacturing plants and labs for unintended accidents or contamination of workers. If accidental exposure to heat, alkalis, acids, flame, contamination or other hazards occur, workers can use the safety shower to give themselves a whole-body rinsing. It is designed to provide a large-volume flow and a high-Velocity spray to wash off and neutralize the contaminants, hazardous material etc.
safety showers are normally installed near places where hazardous material is used or stored to provide immediate access to the facility.
How do safety showers work?
The safety shower is a vital part of housing unit because it removes hazardous material from a body by a constant flow of water. If any accident happen, one has to press a the button or pull the lever to active the shower head and the safety shower is large enough to flush all the hazardous material out of your system in at most 15 minutes.
When should safety showers be installed?
Persons suffering exposure to harmful product have to be washed using a safety shower. If there are an existense of radioactive materials, corrosives or chemicals, these showers provide security. They are accompanied with safety standards and procedures, provided on Safety datasheet, which contains information about all relevant risks and site risk assessments provide guidelines for their use. Employees are required to be trained regarding the correct use of safety shower and specification for their use.
Where should be the location of safety showers?
Therefore, it is recommended to setup the safety shower in a safe and easy-reachable place such as places where hazardous substances are held, used or adjacent to hazardous area. The way to the shower should be must be clear and free of any obstacles, built on flat ground. Some requirements about the places of the safety shower are stipulated in the standard.
What type of safety showers are available?
(1). THe most common safety shower works stand alone and is usually found in industrial places. (2). Another type safety showers available for sale, which is ceiling or wall mounted and used in training center and Leather. (3). The last type of a safety shower is specially design for the disabled and people requirements the barrier free.
How much water should safety showers deliver?
The required amount of water should be supplied by the safety shower during the period of 15 minutes. It varies based on a specific standard. Not all standards demand the same volume of excrete water that a safety shower should deliver.
What temperature should the safety shower maintain?
The water coming out of the safety shower should be neither too hot nor too cold. It mustn’t be tepid, or else people using it will actually get scalded, or suffer that atrocious word: thermal shock.
Firstly, safety for your employees should always be one of the main concerns of an employer and, secondly, your investment in safety showers proves safety investing in your workforce.
